| 1 | Machine Frame | Gantry steel structure type |
| 2 | Guide rail spacing | 8000mm |
| 3 | Guide rail length | 8000mm |
| 4 | Guide rail type | 24Kg national standard, 2 Pieces * 2M |
| 5 | Driving type | Bilateral servo drive |
| 6 | Numerical control system | Beijing Starf2400S One Set |
| 7 | System Display Screen | Color LCD screen 10 "1 set. |
| 8 | Operator Station Position | Left operation |
| 9 | Electric control part | Logic Control Cabinet One Set |
| 10 | Stabilization power supply | Huatong SVC-3000 One Set |
| 11 | Machine plasma power supply | CUT400A One Set |
| 12 | Numerical control plasma cutting torch | One Set |
| 13 | Numerical control flame cutting torch | One Set |
| 14 | NC cutting torch moving device | One Set |
| 15 | NC cutting torch lifting device | German technology, 2 sets of linear modules with double guide rails. |
| 16 | Longitudinal and transverse drive system | Panasonic Servo 3 sets. |
| 17 | Longitudinal and transverse deceleration system | Taiwan PinHong 3 sets |
| 18 | Transverse mechanical transmission | 1 set of precision gear rack and double-shaft core guide rail. |
| 19 | Longitudinal mechanical transmission | 1 set of precision gear rack. |
| 20 | Transverse pipeline drive. | 1 set of engineering drag chain. |
| 21 | Longitudinal pipeline drive. | 1 set of engineering drag chain. |
| 22 | Main frame color | sea blue |
| 1 | Arc pressure type automatic height adjustment. | one set of HP 103 |
| 2 | Anti collision device of plasma cutting torch | one set of proximity switch |
| 3 | Automatic ignition device | one set |
| 4 | Longitudinal and transverse electronic limit switch | Four |
| 5 | Longitudinal and transverse mechanical limiting device | Four |
| 6 | Dust removal and scraping device of guide rail | one set |
| 7 | Programming nesting software | StarCAM or FastCAM one Set |
| 1 | Effective cutting width | ≤3200mm |
| 2 | Effective cutting length | ≤6000mm |
| 3 | Idle travel speed | 0-6000mm/min |
| 4 | Flame cutting materials | carbon steel |
| 5 | Flame cutting thickness | 6-150mm |
| 6 | Flame perforation thickness (single torch) | ≤80mm |
| 7 | Flame cutting speed | 50-750mm/min |
| 8 | Lifting distance of flame cutting torch | ≤180mm |
| 9 | Lifting mode of flame cutting torch | Electric lift |
| 10 | Plasma cutting materials | Carbon steel, stainless steel, nonferrous metals, etc |
| 11 | Plasma carbon steel perforation cutting thickness | ≤35mm Stainless steel ≤25mm. |
| 12 | Plasma carbon steel edge cutting thickness. | ≤50mm |
| 13 | Plasma quality cutting speed. | mm/min |
| 14 | Lifting distance of plasma torch. | ≤180mm |
| 15 | Lifting mode of plasma cutting torch. | Automatic arc pressure lifting. |
| 16 | Accuracy standard of whole machine | Comply with JB/T5102-1999. |
| 17 | Vertical tolerance of cutting torch's up and down motion trajectory. | ±0.2mm |
| 18 | Tolerance of tracking accuracy of cutting torch's up-and-down motion trajectory. | ±0.5mm |
| 19 | Comprehensive precision of whole machine Length (four sides) 1000*1000. Marking speed is 500-800mm/min. |
|
| 20 | Scribe detection: intersection offset tolerance. | ±0.5mm |
| 21 | Marking inspection: straightness tolerance. | ±0.2mm |
| 22 | Marking inspection: roundness tolerance. | ±0.5mm |
| 23 | Marking detection: diagonal tolerance. | ±0.5mm |
| 25 | Cutting roughness (during quality cutting) | Ra≤12.5μm |
